Children are even more at risk, due to their thinner skulls and their developing brains and neurological systems. EMFs have been linked to increased risk of leukemia, brain cancer, possibly ADD, autism, etc.
When it comes to cancer and many other diseases,
an ounce of prevention is worth infinite pounds of cure.
Too often, there is no cure.
Measure Extremely Low Frequency (ELF) EMFs With
Also known as "Dr. Gauss"
This little meter measures the level of ELF magnetic field radiation from power lines, computers, kitchen appliances, and more! The easy to read scale, unique built-in audio signal and auto shut-off make it simple to use and a great way to find hidden sources of ELF frequency magnetic fields.
Most experts agree that chronic exposure to more than 2.5 milli-Gauss is inadvisable. This meter will show you which areas are above or below 2.5 milli-Gauss in the 50 - 60 Hz frequency range.
Hand-held, lightweight and durable, with two easy to read scales (0-1 mG, & 0-10 mG), and dramatic audio signal. Our favorite meter for demonstrating the presence of dangerous EMFs to others and paranormal work. Requires one 9V battery (not included). Calibrated at 50-60 Hz.
Includes nice instructions on how to perform a proper survey of your home, office, or school yard.
Lightning fast needle response, audio function
Gauss Master (Cat. #A130) ......................................... $34.95
Measure RF and ELF with the Cornet Dual Mode ED-25G
Cornet ED-25G (0.1-3GHz) RF/ELF Electrosmog field strength power meter with build-in Gauss meter function (dual mode).
Operation mode: Dual mode of operation
- High frequency RF Broadband power meter mode
- Low frequency Magnetic field (Gauss meter) mode
Frequency range: 100MHz to 3.0GHz useful range (RF mode)
50Hz to 10KHz useful range (Gauss meter mode)
High sensitivity: -55 dBm to 0 dBm (RF mode)
1 to 600 mGauss, 0.1 to 60uT (Gauss meter mode)
Peak Power density: 0.0018mw/m-sq to 0.58 w/m-sq (RF mode)
Dynamic range: 60 dB (RF mode)
Signal : Analog RF(AM/FM) and high speed digital burst RF
AC power line, Transformer, Motor, Appliance EMF
Display: Graphics LCD multi-digit power level display, moving
Histogram, level bar display, color LED segment.
Function: RF power level, LF magnetic field strength, hold
Power supply: 9V DC battery
RF/ELF Dual Mode Power Meter (ED-25G)..................... $105.95
New !! 8GHz bandwidth series --
Cornet ED85EX -- (1MHz-8GHz) RF field strength power meter
with SMA connector
-Super wide bandwidth (1MHz-8GHz)
RF field strength power measurement
- External SMA connector
-direct connection to RF signal sources,
-5.8GHz WLAN measurement
-UWB ultra wideband signals
- High sensitivity, -55dBm to +5dBm
• RF field strength/power level measurement
• Cellular phone base station radiation power
Density safety measurement
• RF safety measurement, UWB
• RF Transmitters power output measurement
• Wireless LAN (Wi-Fi) detection, installations
• Spy camera, wireless bug finder
• Cellular/cordless phone radiation safety level
• Microwave oven leakage detection
• Personal living environment EMF safety
• Wide frequency range : 1MHz to 8GHz (useful to 10GHz)
• Super Wide dynamic range : 60dB
• High sensitivity : –55dBm to 0 dBm (25mV/m to 14.8V/m)
• Peak power density measurement : 1.5uW/m2 to 0.58W/m2
• LCD moving graphic Histogram and Bar display to display signal power level
• Ultra fast color LED 8 segment level display for easy signal level indication
• Continue wave (AM,FM) and High speed Burst RF(GSM,TDMA,,CDMA, Wi-Fi,WiMAX)
• External SMA connector : (50ohms) for external Antenna, attenuator, and filter
• Small, compact handheld design, 69mmX110mm
• Battery operated (9V DC)
Cornet RF Power Meter (ED85EX) ......................... .......... $174.95
Radio Frequency (RF) POWER METERS
Cornet ED65 RF Field Strength power meter with build-in antenna
100 MHz to 6 GHz range
More and more wireless devices are reaching into the higher frequency bands. If you need more than a 3 GHz meter and you like simplicity, this unit is a good choice. One ON/OFF button, one-handed operation. Just point and take readings.
Continuous LCD digital readout from 0.0018mW/m² to 580 mW/m² gives plenty of dynamic range. Colored 8-segment LED bargraph, and moving bargraph (histogram) showing recent history of signal strength levels. Covers 100MHz to 6GHz. Measures continuous wave signals (microwave oven, AM/FM for example) and pulsed digital signals (Wi-Fi, WiMAX, DECT, etc). Uses one 9V battery.
Wide frequency bandwidth: range
High sensitivity: -55 dBm to 0 dBm
Peak Power density: 0.0018mW/m² to 0.58 W/m²
Continue wave (AM/FM) and high speed digital RF
(GSM, TDMA, CDMA, PCS, WiFi 2.4GHz, 5.8GHz, 3.6GHz WiMAX)
3 safety standard range indications
3 display modes: mW/m², V/m, and dBm
Large LCD multi-digit power level display, Histogram, level bar display
Build-in internal antenna
9V DC battery power supply
8 Intensity Level Increments
On the LED bar display
-5 dBm = 180 mW/m²
-10 dBm = 58 mW/m²
-15 dBm = 18 mW/m²
-20 dBm = 5.8 mW/m²
-25 dBm = 1.8 mW/m²
-30 dBm = 0.58 mW/m²
-35 dBm = 0.18 mW/m²
RF Power Meter (ED65) …............................................. $125.95
STETZERiZER Microsurge Meters
Designed to measure home and office Power Quality,
"Dirty Electricity", aka High Frequency Voltage Transients
The intellectual property behind the Microsurge meter belongs to the individual
who conceived and designed the meter: Professor Martin Graham.
The Microsurge meter:
LCD display reads the Volts per second present, which is an approximation for the high frequency energy. High frequencies are the frequencies which are most harmful to equipment, animals, and humans.
The good, marginal, and undesirable range of meter readings are conveniently listed on the back of the Microsurge meter.
Electrosensitive people have reported sensitivities with readings as low as 27 on the Microsurge meter. However, medium or even low Microsurge meter readings should not be interpreted as a guarantee that there is no harmful health impact; only a medical expert can determine that. Caution is required. Some harmful health effects of high frequency energy on humans appear to be cumulative, and possibly non-reversible. Science is inconclusive in this area, although the body of empirical evidence available for guidance continues to expand and stabilize.
The GS Microsurge Meter measures the current in a 800 picofarad capacitor connected across the terminals of the outlet into which it is plugged. One GS unit is .02 micro amperes. A meter reading of 50 would indicate a current of one microampere. A human having a low impedance to one of the terminals of the outlet (the grounded wire) and a capacitive coupling of 800 picofarads to wiring connected to the other terminal of the outlet (the hot wire) would have a current flowing through them indicated by the GS Microsurge Meter. The capacitance of two parallel metal plates that are one meter by one meter and separated by one centimeter is about 800 picofarads. The capacitance of a human to the hot wires will usually be less than 800 picofarads and the current through the human will be proportionatly lower. The current flow through the human will also depend on how the capacitance of the human to the wire is distributed over the human. This is important since it is the current flowing inside the body and where it is flowing that determines the effect it will have on the human. The frequency band covered by the GS Microsurge Meter is about 10 kHz to 100 kHz.
Microsurge Meter Design Criteria
Microsurge meters were specifically deigned as a companion to the STETZERiZER filters. The meters measure the level of harmful electromagnetic "energy" present, and their primary use is to guide effective filter installation.
Microsurge meters are low cost, robust, and easy to use by non-technical people. The meters were designed to measure harmonics and other high frequency "energy" present, which are the frequencies most detrimental to human health. The meters effectively ignore the effects of 60 Hz power and other lower, less harmful frequencies. Specifically, the meter measures the average magnitude of the changing voltage as a function of time (dV/dt), which naturally emphasizes transients and other high frequency phenomena that change rapidly with time. The measurements of dV/dt read by the meter are defined as G-S (Graham-Stetzer) units (since no standard term is available). The G-S units are a measure of "harmful energy" which is a function of frequency, or more generally, rate of change of voltage or dV/dt.
Using the Microsurge Meter for a Typical Home Installation
Microsurge meters measure the levels of safe, borderline, or dangerous levels of "energy" present. These levels are conveniently shown on the back of the meter for reference. These levels have been developed through research (much of it in Russia and neighboring countries) and confirmed by experience in North America. The levels have been adopted by the Sanitory Stations (Health Departments) of the Republic of Kazakhstan.
Starting from points that typically have the highest readings such as the power input panel, computers, and televisions, the meter is used to measure the initial levels of G-S energy and reduction as filters are added. Once the G-S levels are acceptable at one location, the process should be repeated at the next location. After the installation of the filters is complete, a final confirmation of the G-S levels should be performed throughout the house.
Works for 60 Hz/120 Volt North American and 50 Hz/240 A.C. Volt European systems
STETZERiZER Microsurge Meter .............. $99.95